Brand:  DIXELL
Model:  XC460D-5B00E
 
The XC460D is designed to manage both compressors and fans in a condensing system such as a pack. The compressors can be simple, multistage or with different capacities. Control is by means of a neutral zone or proportional band and is based on the pressure or temperature sensed in the LP suction (compressors) and HP (condenser) circuits. A special algorithm balances the run hours of the compressors to distribute the work load uniformly. The controllers can convert both LP and HP pressures and display them as temperatures. The front panel offers complete information on the system’s status by displaying the suction and condenser pressure (temperatures), the status of the loads, possible alarms or maintenance conditions. Each load has its own alarm input that is able to stop it when activated. To guarantee the total system’s safety, there are also two inputs for low and high pressure switches: when these are activated, the system is stopped. By means of the HOT KEY the controller can be easy programmed at power on. The controller can be connected to the XJ500, controlling and monitoring system, thanks to the serial TTL output, using the standard ModBus RTU protocol.
 
 
 
Download https://webapps.emerson.com/Dixell/Content/Pages/Manuals/XC400600/XC460D/XC460D-GB.pdf
 
Digital controllers purchased from us should always be diagnosed and installed by a suitably qualified person, if incorrectly installed they will suffer irrepairable damage, for this reason WE CANNOT OFFER ANY WARRANTY on this type of part.